Paper
25 July 2013 Influence of carbon nanoparticles on the properties of screen printed polymer composites
Małgorzata Jakubowska, Kamil Janeczek, Anna Młożniak, Grażyna Kozioł, Aneta Araźna
Author Affiliations +
Proceedings Volume 8902, Electron Technology Conference 2013; 890227 (2013) https://doi.org/10.1117/12.2030405
Event: Electron Technology Conference 2013, 2013, Ryn, Poland
Abstract
Further development of printed electronics requires investigations of new polymer composites which can be coated on flexible substrates with printing techniques. These composites should exhibit low sheet resistance and high durability to thermal stresses. In this article, the properties of polymer composites prepared by mixing a commercial solution of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) in aliphatic hydrocarbons with multi-wall carbon nanotubes or graphite platelet nanofibers were described. These composites were coated on flexible and low-cost substrates with screen printing techniques. The microstructure of fabricated layers were observed in a top and cross-sectional view and their thickness was measured with a contact profilometer. Their resistance was measured with a four-point-probe method depending on a printing multiplicity and after exposure the tested samples to the influence of temperature variation. Temperature distribution under influence of current flow in the produced layers was also examined.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Małgorzata Jakubowska, Kamil Janeczek, Anna Młożniak, Grażyna Kozioł, and Aneta Araźna "Influence of carbon nanoparticles on the properties of screen printed polymer composites ", Proc. SPIE 8902, Electron Technology Conference 2013, 890227 (25 July 2013); https://doi.org/10.1117/12.2030405
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Composites

Resistance

Polymers

Printing

Carbon

Nanoparticles

Electroluminescence

Back to Top