19 September 2013 Recent development of 3D imaging laser sensor in Mitsubishi Electric Corporation
Author Affiliations +
Proceedings Volume 8905, International Symposium on Photoelectronic Detection and Imaging 2013: Laser Sensing and Imaging and Applications; 89052V (2013) https://doi.org/10.1117/12.2035310
Event: ISPDI 2013 - Fifth International Symposium on Photoelectronic Detection and Imaging, 2013, Beijing, China
We have been developing 3-D imaging laser sensors for several years, because they can acquire the additional information of the scene, i.e. the range data. It enhances the potential to detect unwanted people and objects, the sensors can be utilized for applications such as safety control and security surveillance, and so forth. In this paper, we focus on two types of our sensors, which are high-frame-rate type and compact-type. To realize the high-frame-rate type system, we have developed two key devices: the linear array receiver which has 256 single InAlAs-APD detectors and the read-out IC (ROIC) array which is fabricated in SiGe-BiCMOS process, and they are connected electrically to each other. Each ROIC measures not only the intensity, but also the distance to the scene by high-speed analog signal processing. In addition, by scanning the mirror mechanically in perpendicular direction to the linear image receiver, we have realized the high speed operation, in which the frame rate is over 30 Hz and the number of pixels is 256 x 256. In the compact-type 3-D imaging laser sensor development, we have succeeded in downsizing the transmitter by scanning only the laser beam with a two-dimensional MEMS scanner. To obtain wide fieldof- view image, as well as the angle of the MEMS scanner, the receiving optical system and the large area receiver are needed. We have developed the large detecting area receiver that consists of 32 rectangular detectors, where the output signals of each detector are summed up. In this phase, our original circuit evaluates each signal level, removes the low-level signals, and sums them, in order to improve the signalto- noise ratio. In the following paper, we describe the system configurations and the recent experimental results of the two types of our 3-D imaging laser sensors.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Imaki, N. Kotake, H. Tsuji, A. Hirai, S. Kameyama, "Recent development of 3D imaging laser sensor in Mitsubishi Electric Corporation", Proc. SPIE 8905, International Symposium on Photoelectronic Detection and Imaging 2013: Laser Sensing and Imaging and Applications, 89052V (19 September 2013); doi: 10.1117/12.2035310; https://doi.org/10.1117/12.2035310


A low power CMOS trans impedance amplifier for FM cw...
Proceedings of SPIE (September 19 2013)
Two-channel MIMO-OCC transmission system on a smartphone
Proceedings of SPIE (August 07 2017)
Eye-safe laser radar 3D imaging
Proceedings of SPIE (September 13 2004)
HgCdTe detector technology at Kunming Institute of Physics
Proceedings of SPIE (September 25 1996)
Radiometric modelling of a 3D imaging laser scanner
Proceedings of SPIE (October 11 2005)
MEMS-based uncooled THz detectors for staring imagers
Proceedings of SPIE (May 13 2011)

Back to Top