In order to reduce the error of the reconstructed spectrum, in this paper, a calibration method and a correction method to correct the error caused by the CCD spectral response nonuniformity was developed, basing on analysis of the property of the CCD spectral response nonuniformity. Firstly, a calibrated monochromater was used to measure the CCD spectral response nonuniformity and the property and affect of the CCD spectral response nonuniformity were analyzed. Method to correct the error of the reconstructed spectrum caused by the stripe pattern error was developed. Secondly, to calibrate the CCD spectral response nonuniformity, the spectral response coefficient and the spatial response nonuniformity coefficient was measured and computed. Finally, we took data with a Fourier transform imaging spectrometer, and got the correction results of the reconstructed spectrums. The results showed that the distortion of recovered spectrum was evidently reduced and the effect of the calibration and correction method was proved.
You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.