10 October 2013 fiber optic interferometer fringe projector using sinusoidal phase-modulating
Author Affiliations +
Proceedings Volume 8916, Sixth International Symposium on Precision Mechanical Measurements; 89160V (2013) https://doi.org/10.1117/12.2035862
Event: Sixth International Symposium on Precision Mechanical Measurements, 2013, Guiyang, China
Abstract
A novel fiber-optic interferometer fringe projector with the sinusoidal phase-modulating method is presented. The system utilizes the integrating bucket method to detect the desired phase or the displacement and a CMOS image sensor to detect four frames obtained by integration of the time-varying intensity in an interference image during the four quarters of the modulation period. Since this technique with the method modulating the injection current of the piezoelectric transducer (PZT), measurement accuracy is not affected by an intensity modulation that usually appears in the current modulation. The system also utilizes the Fresnel reflection signal to adjust the phase-modulation coefficient z to eliminate the disturbance of initial phase ψ0 . The experimental results for surface profiles of a convex hull show that the sinusoidal phase modulating interferometer proposed here confirms its applicability to practical application.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Changrong Lv, Changrong Lv, Fajie Duan, Fajie Duan, Fukai Zhang, Fukai Zhang, Xiaojie Duan, Xiaojie Duan, En Bo, En Bo, Fan Feng, Fan Feng, } "fiber optic interferometer fringe projector using sinusoidal phase-modulating", Proc. SPIE 8916, Sixth International Symposium on Precision Mechanical Measurements, 89160V (10 October 2013); doi: 10.1117/12.2035862; https://doi.org/10.1117/12.2035862
PROCEEDINGS
8 PAGES


SHARE
Back to Top