10 October 2013 Feasibility study of detection of chatter by using FBG during boring
Author Affiliations +
Proceedings Volume 8916, Sixth International Symposium on Precision Mechanical Measurements; 891622 (2013) https://doi.org/10.1117/12.2035882
Event: Sixth International Symposium on Precision Mechanical Measurements, 2013, Guiyang, China
Abstract
A novel real-time monitoring system based on Fiber Bragg Grating (FBG) sensor has been developed to detect chatter in boring process. In the system, a boring bar with large length-to-diameter ratio (FSTUP3225R/L-16S) was the test subject. The FBG sensor was installed on the surface of the boring bar with the length of 225mm. A classical strain gauge was employed to measure the vibratory strain and compare the results with the ones from FBG sensor. The measurements were carried out using various cutting parameters to obtain the desired chatter phenomenon. The analysis of the experimental data was verified the chatter happened during the deep hole boring. Comparison between the experimental results from two kinds of sensors demonstrated that the measurement technique could be used to detect the dynamic strain, as well as the permitting one to research the method to identify boring chatter on-line be using optical fiber sensor system.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. Y. Zhu, P. Y. Zhu, W. Peng, W. Peng, L. Yuan, L. Yuan, Z. J. Hu, Z. J. Hu, } "Feasibility study of detection of chatter by using FBG during boring", Proc. SPIE 8916, Sixth International Symposium on Precision Mechanical Measurements, 891622 (10 October 2013); doi: 10.1117/12.2035882; https://doi.org/10.1117/12.2035882
PROCEEDINGS
5 PAGES


SHARE
Back to Top