Translator Disclaimer
Paper
10 October 2013 Error analysis and modeling for the time grating length measurement system
Author Affiliations +
Proceedings Volume 8916, Sixth International Symposium on Precision Mechanical Measurements; 89163J (2013) https://doi.org/10.1117/12.2035697
Event: Sixth International Symposium on Precision Mechanical Measurements, 2013, Guiyang, China
Abstract
Through analyzing errors of the length measurement system in which a linear time grating was the principal measuring component, we found that the study on the error law was very important to reduce system errors and optimize the system structure. Mainly error sources in the length measuring system, including the time grating sensor, slide way, and cantilever, were studied; and therefore total errors were obtained. Meanwhile we erected the mathematic model of errors of the length measurement system. Using the error model, we calibrated system errors being in the length measurement system. Also, we developed a set of experimental devices in which a laser interferometer was used to calibrate the length measurement system errors. After error calibrating, the accuracy of the measurement system was improved from original 36um/m to 14um/m. The fact that experiment results are consistent with the simulation results shows that the error mathematic model is suitable for the length measuring system.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhonghua Gao, Jiqin Fen, Fangyan Zheng, Ziran Chen, Donglin Peng, and Xiaokang Liu "Error analysis and modeling for the time grating length measurement system", Proc. SPIE 8916, Sixth International Symposium on Precision Mechanical Measurements, 89163J (10 October 2013); https://doi.org/10.1117/12.2035697
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
Back to Top