25 February 2014 Experimental study of the diode pumped alkali laser (DPAL)
Author Affiliations +
A small-scale cesium diode-pumped alkali laser (DPAL) apparatus has been developed for fundamental researches. A commercial laser diode with volume Bragg grating outcoupler is used to pump the gain cell longitudinally. Both windows of the gain cell are set at Brewster’s angle for minimum loss and maximum durability. Output coupling coefficient is continuously variable from 13% to 85% by the slanted quartz plate outcoupler inserted in the optical resonator. Small signal gain is measured with a laser diode probe at various gain cell temperatures. A 6.5 W continuouswave output with 56% optical-to-optical conversion efficiency (based on the absorbed power) has been achieved. A numerical simulation code is developed and its calculation results are in good agreement with the experiments.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Masamori Endo, Masamori Endo, Ryuji Nagaoka, Ryuji Nagaoka, Hiroki Nagaoka, Hiroki Nagaoka, Toru Nagai, Toru Nagai, Fumio Wani, Fumio Wani, "Experimental study of the diode pumped alkali laser (DPAL)", Proc. SPIE 8962, High Energy/Average Power Lasers and Intense Beam Applications VII, 896205 (25 February 2014); doi: 10.1117/12.2045391; https://doi.org/10.1117/12.2045391


DPAL activities in Japan
Proceedings of SPIE (February 02 2015)
Semi analytical and 3D CFD DPAL modeling feasibility of...
Proceedings of SPIE (February 24 2014)

Back to Top