25 February 2014 Scalable pump source for diode pumped alkali laser
Author Affiliations +
Abstract
External cavity diode laser systems are well-suited for diode pumped alkali laser (DPAL) systems due to their high power efficiency and excellent wavelength control under changing thermal loads. By conditioning the characteristics of feedback power, external cavities can narrow the spectral bandwidth and limit transverse modes of diode laser bars. Existing configurations typically use low-efficiency diffraction gratings at the Littrow angle to send back to the diodes a small fraction of the power, while directing the majority of the power forward in the output beam. We previously reported that a stepped mirror allows a single external cavity to condition the output beams of a stack of diode array bars. In this report, we describe a new approach that could use a single external cavity to condition the output beams of several hundred diode array bars. A high efficiency grating is used to feedback essentially all the power in the external cavity, and power splitters then distribute the power to multiple diode array stacks. A 384 bar module capable of 20 kW power output into a modelimited slowly diverging beam with a spectral width below 0.050 nm has been designed and proposed for use in a DPAL. A 50 bar 3 kW prototype is currently being assembled.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
F. W. Hersman, J. H. Distelbrink, J. Ketel, D. Sargent, D. W. Watt, "Scalable pump source for diode pumped alkali laser", Proc. SPIE 8962, High Energy/Average Power Lasers and Intense Beam Applications VII, 89620E (25 February 2014); doi: 10.1117/12.2044722; https://doi.org/10.1117/12.2044722
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT


Back to Top