20 February 2014 Aberration beam shaping in laser cutting with large aspect ratios
Author Affiliations +
The reasons of occurrence of the primary aberrations in optical systems for high-power-technology lasers have been analyzed. The laser intensity profile transformation in presence of a primary aberration of the both signs has been studied. A number of the optical systems with completely the same optical parameters except uncorrected primary aberration has been designed. The influence of laser intensity profile produced by these systems on the quality of midpenetrating laser cutting has been examined. It has been found that good quality cuts may be obtained for every shape of the laser intensity distribution. However, the more the scale of an uncorrected aberration is the more accurate the focal point position has to be maintained.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
V. I. Yurevich, V. I. Yurevich, S. G. Gorny, S. G. Gorny, I. V. Polyakov, I. V. Polyakov, A. A. Afonyushkin, A. A. Afonyushkin, "Aberration beam shaping in laser cutting with large aspect ratios", Proc. SPIE 8963, High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications III, 89630Y (20 February 2014); doi: 10.1117/12.2035496; https://doi.org/10.1117/12.2035496


A cutting-edge solution for 1µm laser metal processing
Proceedings of SPIE (February 21 2017)
Beam shaping as an enabler for new applications
Proceedings of SPIE (February 21 2017)
Development of an adaptive laser beam shaper
Proceedings of SPIE (February 15 2018)
Optics for cutting with an off-axis laser beam
Proceedings of SPIE (January 31 1994)

Back to Top