12 March 2014 Robust adhesive precision bonding in automated assembly cells
Author Affiliations +
Abstract
Diode lasers are gaining importance, making their way to higher output powers along with improved BPP. The assembly of micro-optics for diode laser systems goes along with the highest requirements regarding assembly precision. Assembly costs for micro-optics are driven by the requirements regarding alignment in a submicron and the corresponding challenges induced by adhesive bonding. For micro-optic assembly tasks a major challenge in adhesive bonding at highest precision level is the fact, that the bonding process is irreversible. Accordingly, the first bonding attempt needs to be successful. Today’s UV-curing adhesives inherit shrinkage effects crucial for submicron tolerances of e.g. FACs. The impact of the shrinkage effects can be tackled by a suitable bonding area design, such as minimal adhesive gaps and an adapted shrinkage offset value for the specific assembly parameters. Compensating shrinkage effects is difficult, as the shrinkage of UV-curing adhesives is not constant between two different lots and varies even over the storage period even under ideal circumstances as first test results indicate. An up-to-date characterization of the adhesive appears necessary for maximum precision in optics assembly to reach highest output yields, minimal tolerances and ideal beamshaping results. Therefore, a measurement setup to precisely determine the up-to-date level of shrinkage has been setup. The goal is to provide necessary information on current shrinkage to the operator or assembly cell to adjust the compensation offset on a daily basis. Impacts of this information are expected to be an improved beam shaping result and a first-time-right production.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tobias Müller, Tobias Müller, Sebastian Haag, Sebastian Haag, Thomas Bastuck, Thomas Bastuck, Thomas Gisler, Thomas Gisler, Hansruedi Moser, Hansruedi Moser, Petteri Uusimaa, Petteri Uusimaa, Christoph Axt, Christoph Axt, Christian Brecher, Christian Brecher, } "Robust adhesive precision bonding in automated assembly cells", Proc. SPIE 8965, High-Power Diode Laser Technology and Applications XII, 89650Y (12 March 2014); doi: 10.1117/12.2040681; https://doi.org/10.1117/12.2040681
PROCEEDINGS
8 PAGES


SHARE
Back to Top