You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
6 March 2014Ground receiver unit for optical communication between LADEE spacecraft and ESA ground station
NASA’s Lunar Laser Communication Demonstration (LLCD) demonstrates optical communication between ground
stations on Earth and NASA’s LADEE spacecraft orbiting the Moon. As a contribution to the LLCD experiment, the
European Space Agency (ESA) prepares its existing optical ground station to serve as a complementary ground
communication terminal. A ground receiver unit was developed for this purpose. It comprises optical detectors and
electronics to recover the frames, decode the data and store them in a large data buffer.
The overall ground receiver unit design is presented and explained together with ground test activities. Different optical
detectors had been evaluated and two detector types were chosen for implementation. A multimode fiber is used to
couple the optical signal from the existing telescope into the detectors. The 16ary-Pulse Position Modulation (PPM)
signal is then processed in the electronics. Clock recovery and frame synchronization could be shown to work reliably at
low power and under severe power fluctuations. For error correction, a powerful 1/2-rate Serially Concatenated PPM
(SCPPM) decoder is applied. The user data is decoded at a throughput of 39Mbps with up to 20 turbo iterations. With the
developed ground receiver unit an average signal power of only a few hundred picowatts is required to yield a frame
error rate smaller than 10-5.
The ground receiver unit was tested for compatibility with NASA’s ground support equipment and installed in ESA’s
Optical Ground Station on Tenerife. It was used in actual optical downlinks in October and November 2013. LLCD
downlink results are presented and analyzed.
The alert did not successfully save. Please try again later.
Felix Arnold, Martin Mosberger, Johannes Widmer, Fabio Gambarara, "Ground receiver unit for optical communication between LADEE spacecraft and ESA ground station," Proc. SPIE 8971, Free-Space Laser Communication and Atmospheric Propagation XXVI, 89710M (6 March 2014); https://doi.org/10.1117/12.2039959