7 March 2014 MEMS optical tunable filter based on free-standing subwavelength silicon layers
Author Affiliations +
Abstract
We report a MEMS optical tunable filter based on high-aspect-ratio etching of sub-wavelength silicon layers on a silicon- on-insulator wafer. The reported filter has measured free-spectral and filter-tuning ranges of approximately 100 nm and a finesse of about 20 around a wavelength of 1550 nm, enabled by the use of 1000 nm-thick silicon layers and a balanced tilt-free motion using a lithographically-aligned electrostatic actuator. The average insertion loss of the filter is about 12 dB with a superior wavelength-dependent loss of about 1.5 dB. The filter has an out-of-band to in-band wavelength rejection ratio that is better than 20 dB. The reported filter experimental characteristics and its integrability are suitable for the production of integrated swept sources for optical coherence tomography application and miniaturized spectrometers.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Haitham Omran, Haitham Omran, Yasser M. Sabry, Yasser M. Sabry, Mohamed Sadek, Mohamed Sadek, Khaled Hassan, Khaled Hassan, Mohamed Y. Shalaby, Mohamed Y. Shalaby, Diaa Khalil, Diaa Khalil, "MEMS optical tunable filter based on free-standing subwavelength silicon layers", Proc. SPIE 8977, MOEMS and Miniaturized Systems XIII, 89770V (7 March 2014); doi: 10.1117/12.2040767; https://doi.org/10.1117/12.2040767
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Optically pumped 1550nm wavelength tunable MEMS VCSEL
Proceedings of SPIE (March 14 2016)
Design techniques for surface-micromachining MEMS processes
Proceedings of SPIE (September 18 1995)
Low-cost microspectrometer
Proceedings of SPIE (August 21 2000)

Back to Top