8 March 2014 New single-mode, multi-fiber, expanded-beam, passive optical interconnect
Author Affiliations +
Proceedings Volume 8991, Optical Interconnects XIV; 89910J (2014) https://doi.org/10.1117/12.2043171
Event: SPIE OPTO, 2014, San Francisco, California, United States
Abstract
This paper describes the design and performance of next generation, single-mode, multi-fiber, debris insensitive, expanded beam, interconnect components. This low cost, dense optical interconnect technology combined with recent advances next generation, high bandwidth, SM, silicon photonic based Tx/Rx devices is enabling unprecedented bandwidth densities for extended distances at reduced costs. A monolithic, multi-fiber ferule with integrated collimating lenses was designed with the same overall footprint as a traditional MT-type, multi-fiber rectangular ferrule. The new optical ferrule was designed with precision micro holes for alignment to the lens array allowing for future incorporation of multiple rows of fibers into a single ferrule unit. The monolithic, lensed based ferule design enables a low-cost, no-polish fiber termination methodology. The ferrule tested was manufactured with an array of 16 fibers in the footprint associated with traditional, 12 fiber, physical contact MT ferules via use of novel, molded in, end-face alignment features. Multiple optical models were built with ray tracing methodology to predict the insertion loss and return loss with varying refraction index, transmissivity and surface reflection properties of the ferrule. Empirical optical performance results closely match the optical modeling predictions. Insertion losses of <1.5dB were measured along with return loss values <=-30dB. Further analysis was done to characterize the robustness of the new interconnect with regard to debris insensitivity. Do to the nature of the expanded beam, free-space optical design, the impact of debris on the optical mating surface of the interconnect was significantly reduced when compared to traditional, physical contact single-mode interconnects
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Darrell Childers, Mike Hughes, Toshiaki Satake, "New single-mode, multi-fiber, expanded-beam, passive optical interconnect", Proc. SPIE 8991, Optical Interconnects XIV, 89910J (8 March 2014); doi: 10.1117/12.2043171; https://doi.org/10.1117/12.2043171
PROCEEDINGS
14 PAGES


SHARE
Back to Top