31 January 2014 Vibration waveform reproduction and location of OTDR based distributed optical-fiber vibration sensing system
Author Affiliations +
Abstract
In this paper, the scheme for both reproducing vibration waveform and locating disturbed places in the OTDR based distributed optical fiber vibration sensing systems is proposed and demonstrated. Based on the sampling law, the vibration waveform is reproduced from the detecting pulses including original sensing signals by denoising selectively, adjusting bias voltage and band-pass filtering. The vibrations at the frequencies of 500Hz and 1000Hz have been experimentally located and reproduced, respectively, and the highest frequency of 1 kHz for reproducing vibration waveform is realized at the repeat frequency of 2 kHz for the laser.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hui Zhu, Hui Zhu, Chao Pan, Chao Pan, Xiaohan Sun, Xiaohan Sun, } "Vibration waveform reproduction and location of OTDR based distributed optical-fiber vibration sensing system", Proc. SPIE 8993, Quantum Sensing and Nanophotonic Devices XI, 89931P (31 January 2014); doi: 10.1117/12.2041143; https://doi.org/10.1117/12.2041143
PROCEEDINGS
6 PAGES


SHARE
Back to Top