11 March 2014 Front Matter: Volume 9018
Abstract
This PDF file contains the front matter associated with SPIE Proceedings Volume 9018, including the Title Page, Copyright information, Table of Contents, Invited Panel Discussion, and Conference Committee listing.
00001_psisdg9018_901801_page_1_1.jpg

The papers included in this volume were part of the technical conference cited on the cover and title page. Papers were selected and subject to review by the editors and conference program committee. Some conference presentations may not be available for publication. The papers published in these proceedings reflect the work and thoughts of the authors and are published herein as submitted. The publishers are not responsible for the validity of the information or for any outcomes resulting from reliance thereon.

Please use the following format to cite material from this book:

Author(s), “Title of Paper,” in Measuring, Modeling, and Reproducing Material Appearance, edited by Maria V. Ortiz Segovia, Philipp Urban, Jan P. Allebach, Proceedings of SPIE-IS&T Electronic Imaging, SPIE Vol. 9018, Article CID Number (2014)

ISSN: 0277-786X

ISBN: 9780819499356

Copublished by

SPIE

P.O. Box 10, Bellingham, Washington 98227-0010 USA

Telephone +1 360 676 3290 (Pacific Time) · Fax +1 360 647 1445

SPIE.org

and

IS&T—The Society for Imaging Science and Technology

7003 Kilworth Lane, Springfield, Virginia, 22151 USA

Telephone +1 703 642 9090 (Eastern Time) · Fax +1 703 642 9094

imaging.org

Copyright © 2014, Society of Photo-Optical Instrumentation Engineers and The Society for Imaging Science and Technology.

Copying of material in this book for internal or personal use, or for the internal or personal use of specific clients, beyond the fair use provisions granted by the U.S. Copyright Law is authorized by the publishers subject to payment of copying fees. The Transactional Reporting Service base fee for this volume is $18.00 per article (or portion thereof), which should be paid directly to the Copyright Clearance Center (CCC), 222 Rosewood Drive, Danvers, MA 01923. Payment may also be made electronically through CCC Online at copyright.com. Other copying for republication, resale, advertising or promotion, or any form of systematic or multiple reproduction of any material in this book is prohibited except with permission in writing from the publisher. The CCC fee code is 0277-786X/14/$18.00.

Printed in the United States of America.

Paper Numbering: Proceedings of SPIE follow an e-First publication model, with papers published first online and then in print and on CD-ROM. Papers are published as they are submitted and meet publication criteria. A unique, consistent, permanent citation identifier (CID) number is assigned to each article at the time of the first publication. Utilization of CIDs allows articles to be fully citable as soon as they are published online, and connects the same identifier to all online, print, and electronic versions of the publication. SPIE uses a six-digit CID article numbering system in which:

  • The first four digits correspond to the SPIE volume number.

  • The last two digits indicate publication order within the volume using a Base 36 numbering system employing both numerals and letters. These two-number sets start with 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 0A, 0B … 0Z, followed by 10-1Z, 20-2Z, etc.

    The CID Number appears on each page of the manuscript. The complete citation is used on the first page, and an abbreviated version on subsequent pages. Numbers in the index correspond to the last two digits of the six-digit CID Number.

Conference Committee

Symposium Chairs

  • Conference Committee

Symposium Chair

  • Sergio R. Goma, Qualcomm Inc. (United States)

Symposium Cochair

  • Sheila S. Hemami, Northeastern University (United States)

Conference Chairs

  • Maria V. Ortiz Segovia, Océ Print Logic Technologies (France)

  • Philipp Urban, Fraunhofer Institute for Computer Graphics Research IGD (Germany)

  • Jan P. Allebach, Purdue University (United States)

Conference Program Committee

  • Susan P. Farnand, Rochester Institute of Technology (United States)

  • James A. Ferwerda, Rochester Institute of Technology (United States)

  • Jon Yngve Hardeberg, Gjøvik University College (Norway)

  • Andreas Höpe, Physikalisch-Technische Bundesanstalt (Germany)

  • E. J. J. Kirchner, Akzo Nobel Coating B.V. (Netherlands)

  • Susanne Klein, Hewlett-Packard Laboratories (United Kingdom)

  • Carinna E. Parraman, University of the West of England (United Kingdom)

  • Sabine Süsstrunk, Ecole Polytechnique Fédérale de Lausanne (Switzerland)

  • Françoise Viénot, Muséum National d’Histoire Naturelle (France)

Session Chairs

Keynote Presentation: Joint Session with Conferences 9014 and 9018

Jan P. Allebach, Purdue University (United States)

  • 1 Measuring

    Maria V. Ortiz Segovia, Océ Print Logic Technologies (France)

    Philipp Urban, Fraunhofer Institute for Computer Graphics Research IGD (Germany)

  • 2 Material Colors: Joint Session with Conferences 9015 and 9018

    Maria V. Ortiz Segovia, Océ Print Logic Technologies (France)

    Jon Yngve Hardeberg, Gjøvik University College (Norway)

  • 3 Perception and Appearance of Materials: Texture, Luminance, and Noise: Joint Session with Conferences 9014 and 9018

    Philipp Urban, Fraunhofer Institute for Computer Graphics Research IGD (Germany)

    Bernice E. Rogowitz, Visual Perspectives Consulting (United States)

  • 4 Modeling

    Sabine Süsstrunk, Ecole Polytechnique Fédérale de Lausanne (Switzerland)

  • 5 Reproduction

    Carinna E. Parraman, University of the West of England (United Kingdom)

Introduction

The rapid and continuous development of rendering devices such as displays and printers offers interesting challenges related to how materials are understood. Over the years, researchers from different disciplines have studied the interaction of incident light with the texture and surface geometry of a given object, as well as the optical properties of distinct materials. Thanks to those efforts, we have been able to render with high accuracy 2.5D and 3D objects and scenes. But given the day-to-day technological improvements of materials and devices along with the advances in the areas of visual and tactile perception, modeling how light interacts with materials, and techniques for measuring material properties, the field of material appearance is in constant evolution. This conference offers the possibility to share research results and establish new collaborations among academic and industrial researchers from these related fields.

The main topics encountered on the papers of this document correspond to any of the following categories:

Methods for measuring material properties: measurement of Bidirectional Reflectance Distribution Functions (BRDF), Bidirectional Texture Functions (BTF) and Bidirectional Surface Scattering Reflectance Distribution Function (BSSRDF); estimation of material difference perception; evaluation of metallic coatings/inks; measurement of glossiness; estimation of texture perception; data acquisition methods for different types of materials.

Models for distinct characteristics of materials: modeling of Bidirectional Reflectance Distribution Functions (BRDF), Bidirectional Texture Functions (BTF) and Bidirectional Surface Scattering Reflectance Distribution Function (BSSRDF); modeling material difference perception; appearance modeling of glossiness and texture; modeling of varnish and special effects inks; softproofing methods for 2.5D and 3D printing.

Material reproduction aspects: quality evaluation of 2.5D and 3D soft- and hard-copy reproductions (display and printing); estimation of effects of environmental aspects in material perception (lighting, observers’ position, printing media); estimation of sensory input (visual, touch, audio) effect in material perception; evaluation of aesthetic aspects of 2.5D and 3D soft- and hard-copy reproductions (display and printing); saliency of 2.5D and 3D soft- and hard-copy reproductions (display and printing); imaging and perception of metallic and effect coatings/inks; saliency, quality, and aesthetics in appearance reproduction; spectral reproduction.

Maria V. Ortiz Segovia

Philipp Urban

Jan P. Allebach

© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
} "Front Matter: Volume 9018", Proc. SPIE 9018, Measuring, Modeling, and Reproducing Material Appearance, 901801 (11 March 2014); doi: 10.1117/12.2053728; https://doi.org/10.1117/12.2053728
PROCEEDINGS
10 PAGES


SHARE
Back to Top