Translator Disclaimer
24 February 2014 Estimating neugebauer primaries for multi-channel spectral printing modeling
Author Affiliations +
Proceedings Volume 9018, Measuring, Modeling, and Reproducing Material Appearance; 90180C (2014)
Event: IS&T/SPIE Electronic Imaging, 2014, San Francisco, California, United States
Multichannel printer modeling has been an active area of research in the field of spectral printing. The most commonly used models for characterization of such systems are the spectral Neugebauer (SN) and its extensions. This work addresses issues that can arise during calibration and testing of the SN model when modelling a 7-colorant printer. Since most substrates are limited in their capacity to take in large amount of ink, it is not always possible to print all colorant combinations necessary to determine the Neugebauer primaries (NP). A common solution is to estimate the nonprintable Neugebauer primaries from the single colorant primaries using the Kubelka-Munk (KM) optical model. In this work we test whether a better estimate can be obtained using general radiative transfer theory, which better represents the angular variation of the reflectance from highly absorbing media, and takes surface scattering into account. For this purpose we use the DORT2002 model. We conclude DORT2002 does not offer significant improvements over KM in the estimation of the NPs, but a significant improvement is obtained when using a simple surface scattering model. When the estimated primaries are used as inputs to the SN model instead of measured ones, it is found the SN model performs the same or better in terms of color difference and spectral error. If the mixed measured and estimated primaries are used as inputs to the SN model, it performs better than using either measured or estimated.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Radovan Slavuj, Ludovic G. Coppel, Melissa Olen, and Jon Yngve Hardeberg "Estimating neugebauer primaries for multi-channel spectral printing modeling", Proc. SPIE 9018, Measuring, Modeling, and Reproducing Material Appearance, 90180C (24 February 2014);


Generic image matching system(GIMS)
Proceedings of SPIE (May 01 1992)
Simplified ink spreading equations for CMYK halftone prints
Proceedings of SPIE (January 28 2008)
CIE color space and IT8 at work a quantitative...
Proceedings of SPIE (August 04 1993)
Halftone independent methods for color drift correction
Proceedings of SPIE (January 29 2007)

Back to Top