Translator Disclaimer
4 March 2014 An indirect time-of-flight measurement technique for sub-mm range resolution using impulse photocurrent response
Author Affiliations +
Proceedings Volume 9022, Image Sensors and Imaging Systems 2014; 90220W (2014) https://doi.org/10.1117/12.2041160
Event: IS&T/SPIE Electronic Imaging, 2014, San Francisco, California, United States
Abstract
This paper presents a new ToF measurement technique using an impulse photocurrent response. In the proposed technique, a laser with a short pulse width for light source, which can be regarded as an impulse input for a detector. As a result, the range calculation is determined only by photocurrent response of the detector. A test chip fabricated in a 0.11um CIS technology employs a draining-only modulation pixel, which enables a high speed charge modulation. The measurable range measured to be 50 mm within nonlinear error of 5% and the average range resolution of 0.21 mm is achieved.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Takahiro Usui, Keita Yasutomi, Han San Man, Taishi Takasawa, Keiichiro Kagawa, and Shoji Kawahito "An indirect time-of-flight measurement technique for sub-mm range resolution using impulse photocurrent response", Proc. SPIE 9022, Image Sensors and Imaging Systems 2014, 90220W (4 March 2014); https://doi.org/10.1117/12.2041160
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
Back to Top