19 March 2014 Workflow for the use of a high-resolution image detector in endovascular interventional procedures
Author Affiliations +
Abstract
Endovascular image-guided intervention (EIGI) has become the primary interventional therapy for the most widespread vascular diseases. These procedures involve the insertion of a catheter into the femoral artery, which is then threaded under fluoroscopic guidance to the site of the pathology to be treated. Flat Panel Detectors (FPDs) are normally used for EIGIs; however, once the catheter is guided to the pathological site, high-resolution imaging capabilities can be used for accurately guiding a successful endovascular treatment. The Micro-Angiographic Fluoroscope (MAF) detector provides needed high-resolution, high-sensitivity, and real-time imaging capabilities. An experimental MAF enabled with a Control, Acquisition, Processing, Image Display and Storage (CAPIDS) system was installed and aligned on a detector changer attached to the C-arm of a clinical angiographic unit. The CAPIDS system was developed and implemented using LabVIEW software and provides a user-friendly interface that enables control of several clinical radiographic imaging modes of the MAF including: fluoroscopy, roadmap, radiography, and digital-subtraction-angiography (DSA). Using the automatic controls, the MAF detector can be moved to the deployed position, in front of a standard FPD, whenever higher resolution is needed during angiographic or interventional vascular imaging procedures. To minimize any possible negative impact to image guidance with the two detector systems, it is essential to have a well-designed workflow that enables smooth deployment of the MAF at critical stages of clinical procedures. For the ultimate success of this new imaging capability, a clear understanding of the workflow design is essential. This presentation provides a detailed description and demonstration of such a workflow design.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. Rana, R. Rana, B. Loughran, B. Loughran, S. N. Swetadri Vasan, S. N. Swetadri Vasan, L. Pope, L. Pope, C. N. Ionita, C. N. Ionita, A. Siddiqui, A. Siddiqui, N. Lin, N. Lin, D. R. Bednarek, D. R. Bednarek, S. Rudin, S. Rudin, } "Workflow for the use of a high-resolution image detector in endovascular interventional procedures", Proc. SPIE 9033, Medical Imaging 2014: Physics of Medical Imaging, 90335S (19 March 2014); doi: 10.1117/12.2043087; https://doi.org/10.1117/12.2043087
PROCEEDINGS
8 PAGES


SHARE
Back to Top