Paper
19 December 2013 Signal process research in quartz crystal chip counting system
Author Affiliations +
Proceedings Volume 9045, 2013 International Conference on Optical Instruments and Technology: Optoelectronic Imaging and Processing Technology; 90451P (2013) https://doi.org/10.1117/12.2038085
Event: International Conference on Optical Instruments and Technology (OIT2013), 2013, Beijing, China
Abstract
Quartz crystal chip discussed in this paper is a semitransparent crystal with thickness of 0.1~0.2 mm. Generally these chips are packaged into one block with 100 or 200 pieces. Mostly, the counting job is accomplished by weighing the chips, however, thickness difference of each crystal will lead to the inaccurate counting results. A new counting method with imaging and signal processing is proposed in this paper. At first, the edge images of crystal are acquired, thus edge information will be turned into edge signals, then the signal will be enhanced, the noise will be decreased. At last the accurate amount will be get from these edge signals. This method has good practical value because of contact less, high efficiencies and high accuracy.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhebo Chen, Qingguang Chen, and Yajing Ji "Signal process research in quartz crystal chip counting system", Proc. SPIE 9045, 2013 International Conference on Optical Instruments and Technology: Optoelectronic Imaging and Processing Technology, 90451P (19 December 2013); https://doi.org/10.1117/12.2038085
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Signal processing

Image processing

Quartz

Imaging systems

Interference (communication)

Cameras

RELATED CONTENT


Back to Top