17 April 2014 Production of EUV mask blanks with low killer defects
Author Affiliations +
Abstract
For full commercialization, extreme ultraviolet lithography (EUVL) technology requires the availability of EUV mask blanks that are free of defects. This remains one of the main impediments to the implementation of EUV at the 22 nm node and beyond. Consensus is building that a few small defects can be mitigated during mask patterning, but defects over 100 nm (SiO2 equivalent) in size are considered potential “killer” defects or defects large enough that the mask blank would not be usable. The current defect performance of the ion beam sputter deposition (IBD) tool will be discussed and the progress achieved to date in the reduction of large size defects will be summarized, including a description of the main sources of defects and their composition.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alin O. Antohe, Alin O. Antohe, Patrick Kearney, Patrick Kearney, Milton Godwin, Milton Godwin, Long He, Long He, Arun John Kadaksham, Arun John Kadaksham, Frank Goodwin, Frank Goodwin, Al Weaver, Al Weaver, Alan Hayes, Alan Hayes, Steve Trigg, Steve Trigg, } "Production of EUV mask blanks with low killer defects", Proc. SPIE 9048, Extreme Ultraviolet (EUV) Lithography V, 90480H (17 April 2014); doi: 10.1117/12.2048541; https://doi.org/10.1117/12.2048541
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT


Back to Top