31 March 2014 TCO less dye-sensitized solar cell lithographic methods for injecting the electrolyte
Author Affiliations +
Abstract
Typical Dye-sensitized solar cells (DSSC) are composed of mesoporous TiO2 nanocrystals electrode on transparent fluorine-doped tin oxide (FTO) substrate, sensitizers on the TiO2 nanocrystals, platinum (Pt) on the FTO substrate as a counter-electrode, and iodine/iodide electrolytes between the two transparent conducting oxide (TCO) substrate. But two transparent conductive oxide(TCO) substrates are estimated to be about 60[%] of the total cost of the DSSCs. Currently novel TCO-less structures have been investigated in order to reduce the cost. We suggested a TCO-less DSSCs which has titanium layer electrodes. Titanium layer electrodes are formed by electron-beam evaporation method. And we proposed the formation of hole for injecting the electrolyte of DSSC by using lithographic method. The sizes of holes are 4um and the intervals of holes are 2um. Finally, we prepared the 0.45 cm2 DSSC device and analytical instruments such as electrochemical impedance spectroscopy, scanning electron microscope were used to evaluate the TCO-less DSSCs.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hyun Chul Ki, Hyun Chul Ki, Hyang Yoon Jung, Hyang Yoon Jung, Seon Hoon Kim, Seon Hoon Kim, Doo-Gun Kim, Doo-Gun Kim, Tae-Un Kim, Tae-Un Kim, Hwe Jong Kim, Hwe Jong Kim, } "TCO less dye-sensitized solar cell lithographic methods for injecting the electrolyte", Proc. SPIE 9052, Optical Microlithography XXVII, 90521S (31 March 2014); doi: 10.1117/12.2045546; https://doi.org/10.1117/12.2045546
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT


Back to Top