8 March 2014 Characterization of close-loop performance of double drive modes unimorph deformable mirror
Author Affiliations +
Abstract
Unimorph deformable mirrors are attractive in adaptive optics system due to their advantages of simplicity, compact, low cost and large stroke. In this paper, a double drive modes unimorph deformable mirror is discussed, which comprises a 100 μm thick PZT layer and a 200 μm thick silicon layer. This deformable mirror (DM) can achieve two different directions deformation of concave and convex driven by only positive voltage. The dual direction maximum defocus deformations are -14.3 μm and 14.9 μm. The close-loop performance of this DM is also tested in an experimental adaptive optics system based on Hartman-Shack wavefront sensor. In experiments, the DM is controlled by the steepest descent algorithm (SD) to corrected the aberrations in a close-loop manner. The ability of this DM of correction for the system aberration and reconstruction for the low order Zernike mode aberration is tested. The root mean square (rms) value of the system aberration after close-loop correction is about 28 nm. The reconstruction results for most low order Zernike mode aberrations have a relative error less than 10%.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ying Liu, Ying Liu, Jianqing Ma, Jianqing Ma, Junjie Chen, Junjie Chen, Baoqing Li, Baoqing Li, Jiaru Chu, Jiaru Chu, } "Characterization of close-loop performance of double drive modes unimorph deformable mirror", Proc. SPIE 9056, Electroactive Polymer Actuators and Devices (EAPAD) 2014, 90563N (8 March 2014); doi: 10.1117/12.2054109; https://doi.org/10.1117/12.2054109
PROCEEDINGS
6 PAGES


SHARE
Back to Top