A study on vibration control method of building structures using macro fiber composites

Hitoshi Matsushita; Hirokazu Yoshioka; Yoshinori Takahashi

doi:10.1117/12.2045004

9 March 2014 A study on vibration control method of building structures using macro fiber composites

Hitoshi Matsushita, Hirokazu Yoshioka, Yoshinori Takahashi

Author Affiliations +

Proceedings Volume 9057, Active and Passive Smart Structures and Integrated Systems 2014; 90571S (2014) https://doi.org/10.1117/12.2045004
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2014, San Diego, California, United States

Abstract

Sheeted or fibrous piezoelectric devices have been recently developed as actuators or sensors. These light and flexible devices are expected to create many innovative methods for the vibration control of structures. In this paper, we discuss the active control of vertical and horizontal micro-vibration of an architectural frame structure using Macro Fiber Composites (MFCs). MFCs are sheeted piezoelectric devices constructed with fibrous piezoceramics that can produce relatively higher forces than other sheeted piezoelectric devices. We arranged MFCs at the lower flange of both ends of a beam as actuators. By the expansion and contraction of the MFC actuators, bending moments act at both ends of the beam. The synchronized movements of the MFC actuators control the vertical vibration of the beam or slab. The opposite phase movements control the horizontal vibration of the frame structure. MFCs used as sensors are arranged at arbitrary positions on the lower flange surface. An experiment of vertical and horizontal vibration control on a scaled frame model is conducted and the results show that the control method effectively minimizes the resonant vibration. A vertical vibration control test on a real architectural structure is also conducted. The MFCs are arranged at the ends of two beam-spanning girders. Consequently, the vertical floor vibration of 0.04 m/s² at 8.5 Hz at the center of the grid was reduced to 0.01 m/s²or about −12 dB.

Citation Download Citation

Hitoshi Matsushita, Hirokazu Yoshioka, and Yoshinori Takahashi "A study on vibration control method of building structures using macro fiber composites", Proc. SPIE 9057, Active and Passive Smart Structures and Integrated Systems 2014, 90571S (9 March 2014); https://doi.org/10.1117/12.2045004

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE