High Strength, Large Core Pure Silica Fibers For Laser Surgery

B. J. Skutnik; M. H. Hodge; J. P. Clarkin

doi:10.1117/12.945286

21 June 1988 High Strength, Large Core Pure Silica Fibers For Laser Surgery

B. J. Skutnik, M. H. Hodge, J. P. Clarkin

Proceedings Volume 0906, Optical Fibers in Medicine III; (1988) https://doi.org/10.1117/12.945286
Event: 1988 Los Angeles Symposium: O-E/LASE '88, 1988, Los Angeles, CA, United States

Abstract

Recently many researchers, doctors and instrument companies have begun developing fiber optic laser power delivery systems to accomplish less traumatic surgery or localized irradiation treatment(1). With high power levels, particularly in short bursts, large core fibers are needed to keep the power densities from approaching the damage threshold of silica. Among the many advantages of using optical fibers in laser surgery are the following: microsurgery can be employed, trauma is reduced, access to interior through catheter introduction into vascular, gastrointestinal or respiratory tracts, accurate application of laser power through a flexible lightweight medium to provide localized irradiation as well as surgical removal, and the devices are sterilizable and of moderate cost permitting one-time use (disposable) probes. To achieve these wonderful gains in surgical procedures, the optical fibers must satisfy many optical and mechanical requirements. In use the optical fibers are often required to bend around curves or obstructions to reach the desired application area. Large tensile stresses can occur on the outer radius of the bent fiber, especially with large core fibers, thus high strength fibers are needed. Furthermore, since body fluids are primarily water, stress corrosion and fatigue(2-6) will occur. Therefore, the fibers should have excellent fatigue resistance as well as high strength. This paper further describes these requirements and presents details about an optical fiber which meets these requirements and provides additional very useful properties. These fibers with pure silica cores are called Hard Clad Silica, HCS*, fibers because of their hard bonded cladding over silica structure.

Citation Download Citation

B. J. Skutnik, M. H. Hodge, and J. P. Clarkin "High Strength, Large Core Pure Silica Fibers For Laser Surgery", Proc. SPIE 0906, Optical Fibers in Medicine III, (21 June 1988); https://doi.org/10.1117/12.945286

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available