18 June 2014 Temperature-insensitive ultrasonic sensor system based on a fiber ring laser for acoustic emission detection
Author Affiliations +
Abstract
We develop a novel ultrasonic sensor system using a fiber ring laser (FRL) to detect acoustic emissions. The sensor system incorporates two fiber Bragg gratings (FBGs) in the FRL cavity, a short and strong FBG as the sensing element and a long and weak FBG as the adapting element. The reflection spectra of both FBGs are matched such that the reflection peak of the long FBG is positioned at the linear slope of the short FBG’s reflection spectrum. Ultrasonic waves impinging onto the FBGs are to modulate the FRL cavity loss, which leads to laser intensity variations that can be detected directly by photodetectors. The two FBGs are placed side-by-side in close proximity so that the sensor system is able to adapt to the ambient temperature drift. We demonstrate that the ultrasonic sensor system can operate normally within approximately 15ºC temperature change. In addition, the performance of signal-to-noise ratios is investigated as a function of the FRL cavity loss. The proposed temperature-insensitive sensor system is attractive in practical applications where temperature change is unavoidable.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tongqing Liu, Tongqing Liu, Guigen Liu, Guigen Liu, Lingling Hu, Lingling Hu, Ming Han, Ming Han, } "Temperature-insensitive ultrasonic sensor system based on a fiber ring laser for acoustic emission detection", Proc. SPIE 9098, Fiber Optic Sensors and Applications XI, 90981A (18 June 2014); doi: 10.1117/12.2069940; https://doi.org/10.1117/12.2069940
PROCEEDINGS
6 PAGES


SHARE
Back to Top