Front Matter: Volume 9135
Proc. SPIE 9135, Front Matter: Volume 9135, 913501 (15 May 2014);
Cryogenic and Pulsed Lasers
Proc. SPIE 9135, Implications of the temperature dependence of Nd:YAG spectroscopic values for low temperature laser operation at 946 nm, 913503 (12 May 2014);
Proc. SPIE 9135, Semiconductor saturable absorber mirror passively Q-switched 2.97 μm fluoride fiber laser, 913504 (1 May 2014);
Proc. SPIE 9135, Gain-switched PCF rod type fiber laser, 913505 (1 May 2014);
Frequency Combs and Fundamentals
Proc. SPIE 9135, A new RF frequency standard design based on a beat note between longitudinal modes of a frequency locked CW-laser, 913509 (1 May 2014);
Proc. SPIE 9135, Coherence manifestation in a continuous-wave laser, 91350A (1 May 2014);
Proc. SPIE 9135, Resonator modeling by field tracing: a flexible approach for fully vectorial laser resonator modeling, 91350B (1 May 2014);
Nonlinear Upconversion
Proc. SPIE 9135, Ultrafast green laser exceeding 400 W of average power, 91350C (1 May 2014);
Proc. SPIE 9135, CW Yb-fibre laser with wavelength-variable efficient intracavity frequency doubling in partially coupled enhancement cavity, 91350E (1 May 2014);
Proc. SPIE 9135, High-power CW single-frequency Nd:YVO4/LBO laser quasi-continuously tuneable over a wide frequency range, 91350F (1 May 2014);
Proc. SPIE 9135, Linear optical methods for temporal characterization of femtosecond UV pulses, 91350G (1 May 2014);
Mid-IR Sources and Applications
Proc. SPIE 9135, Tunable mid-IR parametric conversion system pumped by a high-average-power picosecond Yb:YAG thin-disk laser, 91350I (12 May 2014);
Proc. SPIE 9135, DFG-based mid-IR laser system for muounic-hydrogen spectroscopy, 91350J (1 May 2014);
Proc. SPIE 9135, Mid-infrared resonant ablation for selective patterning of thin organic films, 91350K (1 May 2014);
Proc. SPIE 9135, Quantum cascade laser tuning by digital micromirror array-controlled external cavity, 91350L (1 May 2014);
Tm-doped Two Micron Lasers
Proc. SPIE 9135, Pulsed kW-peak power and integrated all fiber MOPA single-frequency source at 2050nm, 91350M (1 May 2014);
Proc. SPIE 9135, Fibre laser component technology for 2-micron laser systems, 91350N (1 May 2014);
Proc. SPIE 9135, Devices and pumping architectures for 2μm high power fiber lasers, 91350O (1 May 2014);
Proc. SPIE 9135, Pulsed operation of Tm-doped fiber lasers using piezoelectric-driven microbend applied to elliptical coating fibers, 91350P (1 May 2014);
Short Pulse Processing of Metals
Proc. SPIE 9135, Theoretical and experimental studies of ultra-short pulsed laser drilling of steel, 91350R (1 May 2014);
Proc. SPIE 9135, On the applicability of arbitrarily shaped nanosecond laser pulses for high-quality, high-efficiency micromachining, 91350S (1 May 2014);
Proc. SPIE 9135, Multiscale 3D manufacturing: combining thermal extrusion printing with additive and subtractive direct laser writing, 91350T (1 May 2014);
Proc. SPIE 9135, A brief analysis on pulse front tilt in simultaneous spatial and temporal focusing, 91350V (1 May 2014);
Additive Laser Fabrication Methods I
Proc. SPIE 9135, Application of lower aliphatic alcohols as reducing agents for increasing efficiency of the LCLD process, 91350X (1 May 2014);
Proc. SPIE 9135, Laser processing of thin films for industrial packaging, 91350Y (1 May 2014);
Beam Shaping and Additive Laser Fabrication Methods II
Proc. SPIE 9135, Process optimization of LIFT through visualization: towards high resolution metal circuit printing, 91350Z (1 May 2014);
Proc. SPIE 9135, Metallic coatings obtained by Pulsed Laser Deposition through a dynamic prism system, 913510 (1 May 2014);
Proc. SPIE 9135, Compensation of low order aberrations with reflective beam shaping system, 913511 (1 May 2014);
Proc. SPIE 9135, Interferometric beam shaping, 913512 (1 May 2014);
Laser Applications
Proc. SPIE 9135, Feasibility of real-time geochemical analysis using LIBS (Laser-Induced Breakdown Spectroscopy) in oil wells, 913514 (1 May 2014);
Proc. SPIE 9135, Feasibility and performance study for a space-borne 1645 nm OPO for French-German satellite mission MERLIN, 913515 (1 May 2014);
Proc. SPIE 9135, High-brightness all semiconductor laser at 1.57 μm for space-borne lidar measurements of atmospheric carbon dioxide: device design and analysis of requirements, 913516 (1 May 2014);
Grating Controlled and Novel Lasers
Proc. SPIE 9135, Investigation on thermal behavior of resonant waveguide-grating mirrors in an Yb:YAG thin-disk laser, 913519 (1 May 2014);
Proc. SPIE 9135, Wavelength stabilisation of a DFB laser diode using measurement of junction voltage , 91351A (1 May 2014);
Proc. SPIE 9135, Lyot-filter based multiwavelength random distributed feedback fiber laser, 91351C (1 May 2014);
Ultrashort Pulse Laser Processing of Dielectrics
Proc. SPIE 9135, Thin-disk multipass amplifier for ultrashort laser pulses with kilowatt average output power and mJ pulse energies, 91351D (1 May 2014);
Proc. SPIE 9135, Microfabrication of transparent materials using filamented femtosecond laser beams, 91351E (1 May 2014);
Proc. SPIE 9135, Laser emission from diode-pumped Nd:YAG cladding waveguides obtained by direct writing with a femtosecond-laser beam, 91351F (1 May 2014);
Proc. SPIE 9135, Strong ion migration in high refractive index contrast waveguides formed by femtosecond laser pulses in phosphate glass, 91351G (1 May 2014);
Mode-Locked Lasers
Proc. SPIE 9135, Power and energy scaling of Kerr-lens mode-locked thin-disk oscillators, 91351H (1 May 2014);
Proc. SPIE 9135, 948 kHz repetition rate, picosecond pulse duration, all-PM 1.03 µm mode-locked fiber laser based on nonlinear polarization evolution, 91351I (1 May 2014);
Proc. SPIE 9135, Extent of parameter variability for different pulses from a passively mode-locked fibre laser, 91351K (1 May 2014);
Poster Session
Proc. SPIE 9135, Characterisation of birefringence of [111]-cut crystal rod using side-pumping and crystal rotation, 91351L (1 May 2014);
Proc. SPIE 9135, The pulsed all fiber laser application in the high-resolution 3D imaging LIDAR system, 91351M (1 May 2014);
Proc. SPIE 9135, Cryogenically cooled Pr:YAlO3 laser operating at 747 nm, 662 nm, and 622 nm wavelengths, 91351O (1 May 2014);
Proc. SPIE 9135, Simulation of wavefront reconstruction in beam reshaping system for rectangular laser beam, 91351P (1 May 2014);
Proc. SPIE 9135, Compact Nd:YAG laser operating at 1.06, 1.32, and 1.44um, 91351S (1 May 2014);
Proc. SPIE 9135, Er-doped ortho- and metha-phosphate glassy mixtures for 1.54 μm laser construction, 91351T (1 May 2014);
Proc. SPIE 9135, Laser characteristics of TGT-grown Nd,Y-codoped:SrF2 single crystal, 91351U (1 May 2014);
Proc. SPIE 9135, Detectability of penetration depth based on weld pool geometry and process emission spectrum in laser welding of copper, 91351W (1 May 2014);
Proc. SPIE 9135, Safe range gated imaging LIDAR with a nanosecond frequency doubled Nd:YAG laser, 91351Y (1 May 2014);
Proc. SPIE 9135, Modeling of the spectrum in a random distributed feedback fiber laser within the power balance modes, 91351Z (1 May 2014);