15 May 2014 Comparison of gate driven and source driven FET structures as THz detectors
Author Affiliations +
Abstract
A 600 GHz Field Effect Transistor (FET) is implemented in 0.18 um CMOS technology as a THz detector for imaging applications. A total of 4 FET test structures were fabricated and measured for comparison purposes. Each structure is accompanied by an on-chip bow-tie antenna that directly feeds the detector with THz signal. The detectors are characterized by a THz source and a lock-in amplifier at a sensitivity of 100uV. Measurement results indicate the potential of using both these FET configurations as THz detectors in imaging applications. A normalized frequency sweep analysis shows the broadband nature of Source Driven (SD) FET over the Gate Driven (GD) counterpart. However, the GD structures are more responsive than SD structures. The measurement results also indicate that FET structures with smaller widths show higher voltage response than those with smaller widths for a given channel length.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Muhammad Ali, Muhammad Ali, Matteo Perenzoni, Matteo Perenzoni, } "Comparison of gate driven and source driven FET structures as THz detectors", Proc. SPIE 9141, Optical Sensing and Detection III, 914106 (15 May 2014); doi: 10.1117/12.2052400; https://doi.org/10.1117/12.2052400
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT


Back to Top