Paper
15 May 2014 FBG sensor for temperature-independent high sensitive pressure measurement with aid of a Bourdon tube
Author Affiliations +
Abstract
A temperature independent high sensitive pressure sensing system using fiber Bragg grating (FBG) and ‘C’ shaped Bourdon tube (CBT) is demonstrated. The sensor is configured by firmly fixing the FBG (FBG1) between free and fixed ends of the CBT. Additional FBG (FBG2) in line to the FBG1 is introduced which is shielded from the external pressure, tend to measure only the ambient temperature fluctuations. The CBT has an elliptical cross section where its free end is sealed and the fixed end is open for subjecting the liquid or gas pressure to be measured. With the application of pressure, the free end of CBT tends to straighten out results in an axial strain in FBG1 causes red shift in Bragg wavelength. The pressure can be determined by measuring the shift of the Bragg wavelength. The experimental pressure sensitivity is found to be 66.9 pm/psi over a range of 0 to 100 psi. The test results show that the Bragg wavelength shift is linear corresponds to change in applied pressure and well agreed with the simulated results. This simple and high sensitive design is capable of measuring static/dynamic pressure and temperature simultaneously which suits for industrial applications.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
K. Srimannarayana, P. Vengal Rao, M. Sai Shankar, and P. Kishore "FBG sensor for temperature-independent high sensitive pressure measurement with aid of a Bourdon tube", Proc. SPIE 9141, Optical Sensing and Detection III, 91412E (15 May 2014); https://doi.org/10.1117/12.2052908
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Sensors

Temperature metrology

Head

Optical fibers

Sensing systems

Fiber optics sensors

Back to Top