25 July 2014 The eROSITA x-ray baffle
Author Affiliations +
Abstract
The X-ray baffle is an important part of the eROSITA mirror assembly as it reduces the stray light caused by single reflections at the Wolter 1 Mirrors by more than 90%. The stray light problem and possible solutions were analyzed by ray-tracing resulting in a trade-off between effective stray light protection and avoidance of vignetting. Possible design alternatives were considered and the influences of manufacturing tolerances were studied. Other than for XMM, the eROSITA X-ray baffle could not be realized as sieve plates; instead a system of co-aligned “baffle rings” was mounted onto each of the mirror modules. The mechanical design is based on concentric Invar foils fixed by an own spider. The complete X-ray baffles were finally mounted to the mirror module while the alignment was controlled by optical means.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter Friedrich, Peter Friedrich, C. Rohé, C. Rohé, R. Gaida, R. Gaida, J. Hartwig, J. Hartwig, F. Soller, F. Soller, H. Bräuninger, H. Bräuninger, B. Budau, B. Budau, W. Burkert, W. Burkert, V. Burwitz, V. Burwitz, J. Eder, J. Eder, G. Hartner, G. Hartner, B. Menz, B. Menz, P. Predehl, P. Predehl, } "The eROSITA x-ray baffle", Proc. SPIE 9144, Space Telescopes and Instrumentation 2014: Ultraviolet to Gamma Ray, 91444R (25 July 2014); doi: 10.1117/12.2056335; https://doi.org/10.1117/12.2056335
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT


Back to Top