22 July 2014 Structural analysis and modifications to the V. M. Blanco telescope for dark energy camera (DECam) installation
Author Affiliations +
Abstract
To substantially upgrade the Blanco telescope a new Dark Energy Camera (DECam)5 was developed. The Blanco telescope was commissioned in 1974 before the benefits of modern heavy instruments were foreseen. Consequently, the mass of DECam is greater than the original instrument payload. DECam was installed on the Blanco in 20121, 2. The telescope mount was rebalanced about the declination assembly by redesigning the Cassegrain cage to accommodate a significant increase in balancing mass. Finite element analysis was used to both determine the structural integrity of the new telescope configuration and to predict the effects of this added mass on the relative displacement between the primary and secondary mirrors. The counterweight system is described.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. Schurter, A. Montané, R. Tighe, Timothy M. C. Abbott, F. Muñoz, Douglas Neill, "Structural analysis and modifications to the V. M. Blanco telescope for dark energy camera (DECam) installation", Proc. SPIE 9145, Ground-based and Airborne Telescopes V, 91455G (22 July 2014); doi: 10.1117/12.2057717; https://doi.org/10.1117/12.2057717
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

The Discovery Channel Telescope a wide field telescope in...
Proceedings of SPIE (September 28 2004)
Design and analysis of the tracker bridge for the Hobby...
Proceedings of SPIE (August 06 2010)
VST: a dedicated wide-field imaging facility at Paranal
Proceedings of SPIE (December 24 2002)
A new era for the 2 4 meters class observatories...
Proceedings of SPIE (September 17 2012)
The concept design of the Discovery Channel Telescope mount
Proceedings of SPIE (September 28 2004)
VST project: mechanical design optimization
Proceedings of SPIE (February 04 2003)

Back to Top