24 July 2014 The GRAVITY spectrometers: optical qualification
Author Affiliations +
Abstract
GRAVITY1 is a 2nd generation Very Large Telescope Interferometer (VLTI) operated in the astronomical K-band. In the Beam Combiner Instrument2 (BCI) four Fiber Couplers3 (FC) will feed the light coming from each telescope into two fibers, a reference channel for the fringe tracking spectrometer4 (FT) and a science channel for the science spectrometer4 (SC). The differential Optical Path Difference (dOPD) between the two channels will be corrected using a novel metrology concept.5 The metrology laser will keep control of the dOPD of the two channels. It is injected into the spectrometers and detected at the telescope level. Piezo-actuated fiber stretchers correct the dOPD accordingly. Fiber-fed Integrated Optics6 (IO) combine coherently the light of all six baselines and feed both spectrometers. Assisted by Infrared Wavefront Sensors7 (IWS) at each Unit Telescope (UT) and correcting the path difference between the channels with an accuracy of up to 5 nm, GRAVITY will push the limits of astrometrical accuracy to the order of 10 μas and provide phase-referenced interferometric imaging with a resolution of 4 mas. The University of Cologne developed, constructed and tested both spectrometers of the camera system. Both units are designed for the near infrared (1.95 - 2.45 μm) and are operated in a cryogenic environment. The Fringe Tracker is optimized for highest transmission with fixed spectral resolution (R = 22) realized by a double-prism.8 The Science spectrometer is more diverse and allows to choose from three different spectral resolutions8 (R = [22, 500, 4000]), where the lowest resolution is achieved with a prism and the higher resolutions are realized with grisms. A Wollaston prism in each spectrometer allows for polarimetric splitting of the light. The goal for the spectrometers is to concentrate at least 90% of the ux in 2 × 2 pixel (36 × 36 μm2) for the Science channel and in 1 pixel (24 × 24 μm) in the Fringe Tracking channel. In Section 1, we present the arrangement, direction of spectral dispersion and shift of polarization channels for both spectrometers, and the curvature of the spectra in the science spectrometer. In Section 2 we determine the best focus position of the detectors. The overall contrast of images at different positions of the detector stage is computed with the standard deviation of pixel values in the spectra containing region. In Section 3 we analyze high dynamic range images for each spectrometer and resolution obtained at the afore determined best focus positions. We deduce the ensquared energy from the FWHM of Gaussian fits perpendicular to the spectra.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Senol Yazici, Senol Yazici, Christian Straubmeier, Christian Straubmeier, Michael Wiest, Michael Wiest, Imke Wank, Imke Wank, Sebastian Fischer, Sebastian Fischer, Matthew Horrobin, Matthew Horrobin, Frank Eisenhauer, Frank Eisenhauer, Guy Perrin, Guy Perrin, Karine Perraut, Karine Perraut, Wolfgang Brandner, Wolfgang Brandner, Antonio Amorim, Antonio Amorim, Markus Schöller, Markus Schöller, Andreas Eckart, Andreas Eckart, "The GRAVITY spectrometers: optical qualification", Proc. SPIE 9146, Optical and Infrared Interferometry IV, 914627 (24 July 2014); doi: 10.1117/12.2055313; https://doi.org/10.1117/12.2055313
PROCEEDINGS
14 PAGES


SHARE
RELATED CONTENT

The design of the WEAVE spectrograph
Proceedings of SPIE (July 23 2014)
VEGA: a visible spectrograph and polarimeter for CHARA
Proceedings of SPIE (June 28 2006)
EXES: an echelon cross echelle spectrograph for SOFIA
Proceedings of SPIE (August 20 1998)
Instrumentation plans at Keck Observatory
Proceedings of SPIE (March 20 1997)
Review of imaging spectrometers at ABB Bomem
Proceedings of SPIE (September 22 2003)
Instrumentation for the CCAT Telescope
Proceedings of SPIE (July 05 2006)

Back to Top