28 July 2014 Beating the heat! automated characterization of piezoelectric tubes for Starbugs
Author Affiliations +
Abstract
The Australian Astronomical Observatory has extensively prototyped a new robotic positioner to allow simultaneous positioning of optical fibers at the focal plane called ‘Starbugs’. The Starbug devices each consist of two concentric piezoelectric tubes that ‘walk’ the optical fiber over the focal plane to accuracy of several microns. Ongoing research has led to the development of several Starbug prototypes, but lack of performance data has hampered further progress in the design of the Starbug positioners and the support equipment required to power and control them. Furthermore, Starbugs have been selected for the TAIPAN instrument, a prototype for MANIFEST on the GMT. A need now arises to measure and characterize 100’s of piezoelectric tubes before full scale production of Starbugs for TAIPAN. The manual measurements of these piezoelectric tubes are a time consuming process taking several hours. Therefore, a versatile automated system is needed to measure and characterize these tubes in the laboratory before production of Starbugs. We have solved this problem with the design of an automated LabVIEW application that significantly reduces test times to several minutes. We present the various design aspects of the automation system and provide analyses of example piezoelectric tubes for Starbugs.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rafal Piersiak, Rafal Piersiak, Michael Goodwin, Michael Goodwin, James Gilbert, James Gilbert, Rolf Muller, Rolf Muller, } "Beating the heat! automated characterization of piezoelectric tubes for Starbugs", Proc. SPIE 9147, Ground-based and Airborne Instrumentation for Astronomy V, 91479K (28 July 2014); doi: 10.1117/12.2056964; https://doi.org/10.1117/12.2056964
PROCEEDINGS
17 PAGES


SHARE
Back to Top