21 July 2014 Opto-mechanical design of ShaneAO: the adaptive optics system for the 3-meter Shane Telescope
Author Affiliations +
Abstract
A Cassegrain mounted adaptive optics instrument presents unique challenges for opto-mechanical design. The flexure and temperature tolerances for stability are tighter than those of seeing limited instruments. This criteria requires particular attention to material properties and mounting techniques. This paper addresses the mechanical designs developed to meet the optical functional requirements. One of the key considerations was to have gravitational deformations, which vary with telescope orientation, stay within the optical error budget, or ensure that we can compensate with a steering mirror by maintaining predictable elastic behavior. Here we look at several cases where deformation is predicted with finite element analysis and Hertzian deformation analysis and also tested. Techniques used to address thermal deformation compensation without the use of low CTE materials will also be discussed.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. Ratliff, C. Ratliff, J. Cabak, J. Cabak, D. Gavel, D. Gavel, R. Kupke, R. Kupke, D. Dillon, D. Dillon, E. Gates, E. Gates, W. Deich, W. Deich, J. Ward, J. Ward, D. Cowley, D. Cowley, T. Pfister, T. Pfister, M. Saylor, M. Saylor, "Opto-mechanical design of ShaneAO: the adaptive optics system for the 3-meter Shane Telescope", Proc. SPIE 9148, Adaptive Optics Systems IV, 91483B (21 July 2014); doi: 10.1117/12.2057064; https://doi.org/10.1117/12.2057064
PROCEEDINGS
14 PAGES


SHARE
RELATED CONTENT

ViLLaGEs opto mechanical design of an on sky visible...
Proceedings of SPIE (July 22 2008)
LINC-NIRVANA: the single arm MCAO experiment
Proceedings of SPIE (October 24 2004)
Use of MEMs for active and adaptive optics
Proceedings of SPIE (May 18 2005)
Performance of a MEMS reflective wavefront sensor
Proceedings of SPIE (February 07 2008)
Alignment and integration of ASSIST a test bench for...
Proceedings of SPIE (September 03 2010)
Open-loop performance of a MEMS reflective wavefront sensor
Proceedings of SPIE (September 26 2007)
High-contrast imaging testbed
Proceedings of SPIE (February 07 2008)

Back to Top