28 July 2014 Unimorph-type deformable mirror for cryogenic telescopes
Author Affiliations +
Abstract
Deformable mirrors can be used in cryogenic instruments to compensate for temperature-induced deformations. A unimorph-type deformable mirror consists of a mirror substrate and a piezoelectric layer bonded on substrates rear surface. A challenge in the design of the deformable mirror is the lack of knowledge about material properties. Therefore, we measured the coefficient of thermal expansion (CTE) of the substrate material TiAl6V4 between 295 K and 86 K. The manufactured mirror is characterized by an adaptive optical measurement setup in front of a test cryostat. The measured mirror deformations are feedback into a finite element model to calculate the CTE of the piezoelectric layer. We compare our obtained results to other published CTE-values for the piezoelectric material PIC151.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Claudia Reinlein, Claudia Reinlein, Matthias Goy, Matthias Goy, Nicolas Lange, Nicolas Lange, Jan Kinast, Jan Kinast, } "Unimorph-type deformable mirror for cryogenic telescopes", Proc. SPIE 9151, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation, 915104 (28 July 2014); doi: 10.1117/12.2055996; https://doi.org/10.1117/12.2055996
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

Cryogenic optical testing of sic mirrors for ASTRO F and...
Proceedings of SPIE (November 20 2017)
Deformable mirror technologies for astronomy at CILAS
Proceedings of SPIE (July 06 2008)
Deformable Mirrors At Litton/Itek: A Historical Perspective
Proceedings of SPIE (November 08 1989)
Micromachined silicon deformable mirror
Proceedings of SPIE (September 10 1998)
Modular Adaptive Optics
Proceedings of SPIE (September 19 1989)

Back to Top