12 September 2014 WDM-PON network simulation with different implementation of optical amplifier in the line
Author Affiliations +
Abstract
This article is dealing with simulation of deployment of different optical amplifier types in different positions (power amplifier, in-line amplifier, preamplifier) in the WDM-PON network. For simulation available bit rates per chanell were taken in to account, specifically 125 Mbps, 1.25 Gbps and 2.5 Gbps. Optical amplifiers implementation than has influence on possible transmission distance for WDM-PON network. In simulated topology parameters as bit error ratio, attenuation, Q-factor, OSNR, etc. were observed. The whole designed WDM-PON network topology was based on real device Ericsson-LG EAST1100 available on the market. Necessary parameters and data for simulation were obtained from datasheets and real measurements so that the simulation resemble to the real measured results as much as possible.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jan Latal, Jan Latal, Petr Koudelka, Petr Koudelka, Petr Siska, Petr Siska, Jan Vitasek, Jan Vitasek, Vladimir Vasinek, Vladimir Vasinek, } "WDM-PON network simulation with different implementation of optical amplifier in the line", Proc. SPIE 9193, Novel Optical Systems Design and Optimization XVII, 919318 (12 September 2014); doi: 10.1117/12.2060112; https://doi.org/10.1117/12.2060112
PROCEEDINGS
16 PAGES


SHARE
RELATED CONTENT

Recent advances of optical amplification technology
Proceedings of SPIE (January 27 2017)
Fiber optic transmissions in electrical utility applications
Proceedings of SPIE (December 14 2000)
Bidirectionally dual-order pumped Raman amplifiers
Proceedings of SPIE (January 09 2005)
EDFAs for terabit capacity lightwave systems
Proceedings of SPIE (July 29 2001)

Back to Top