Photonic Doppler velocimetry probe designed with stereo imaging

Robert M. Malone; Brian M. Cata; Edward P. Daykin; David L. Esquibel; Brent C. Frogget; David B. Holtkamp; Morris I. Kaufman; Kevin D. McGillivray; Martin J. Palagi; Peter Pazuchanics; Vincent T. Romero; Danny S. Sorenson

doi:10.1117/12.2062126

8 September 2014 Photonic Doppler velocimetry probe designed with stereo imaging

Robert M. Malone, Brian M. Cata, Edward P. Daykin, David L. Esquibel, Brent C. Frogget, David B. Holtkamp, Morris I. Kaufman, Kevin D. McGillivray, Martin J. Palagi, Peter Pazuchanics, Vincent T. Romero, Danny S. Sorenson

Author Affiliations +

Proceedings Volume 9195, Optical System Alignment, Tolerancing, and Verification VIII; 919503 (2014) https://doi.org/10.1117/12.2062126
Event: SPIE Optical Engineering + Applications, 2014, San Diego, California, United States

Abstract

During the fabrication of an aspherical mirror, the inspection of the residual wavefront error is critical. In the program of a spaceborne telescope development, primary mirror is made of ZERODUR with clear aperture of 450 mm. The mass is 10 kg after lightweighting. Deformation of mirror due to gravity is expected; hence uniform supporting measured by load cells has been applied to reduce the gravity effect. Inspection has been taken to determine the residual wavefront error at the configuration of mirror face upwards. Correction polishing has been performed according to the measurement. However, after comparing with the data measured by bench test while the primary mirror is at a configuration of mirror face horizontal, deviations have been found for the two measurements. Optical system that is not able to meet the requirement is predicted according to the measured wavefront error by bench test. A target wavefront error of secondary mirror is therefore analyzed to correct that of primary mirror. Optical performance accordingly is presented.

Citation Download Citation

Robert M. Malone, Brian M. Cata, Edward P. Daykin, David L. Esquibel, Brent C. Frogget, David B. Holtkamp, Morris I. Kaufman, Kevin D. McGillivray, Martin J. Palagi, Peter Pazuchanics, Vincent T. Romero, and Danny S. Sorenson "Photonic Doppler velocimetry probe designed with stereo imaging", Proc. SPIE 9195, Optical System Alignment, Tolerancing, and Verification VIII, 919503 (8 September 2014); https://doi.org/10.1117/12.2062126

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available