5 September 2014 Characterization of HAMR using pulsed laser light
Author Affiliations +
Abstract
Pulsed Heat Assisted Magnetic Recording (HAMR) is being developed to improve HAMR reliability. In conventional HAMR systems the laser is on and at a fixed power during the writing of the entire sector. In a pulsed HAMR implementation, the laser is turned on and off during the bit cell. For example, for a 50% duty cycle, the laser is on for half the bit cell and off for the remainder of the bit cell. Unlike traditional HAMR where the transitions are formed when the magnetic writer switches, in a pulsed implementation the transitions are formed during the pulsing of the laser. In this paper we show spin stand and drive recording performance of pulsed HAMR systems and compare the outcome to conventional recording. In particular, we show the importance and sensitivity of having proper alignment between the phase of the optical and magnetic signals and their effect on bit error rate (BER).
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kevin R. Heim, Kevin R. Heim, Tim S. Rausch, Tim S. Rausch, Alfredo S. Chu, Alfredo S. Chu, Pu-Ling Lu, Pu-Ling Lu, John W. Dykes, John W. Dykes, Edward C. Gage, Edward C. Gage, } "Characterization of HAMR using pulsed laser light", Proc. SPIE 9201, Optical Data Storage 2014, 920108 (5 September 2014); doi: 10.1117/12.2066243; https://doi.org/10.1117/12.2066243
PROCEEDINGS
10 PAGES


SHARE
RELATED CONTENT

Reliable pump sources for high-energy class lasers
Proceedings of SPIE (May 12 2015)
Highly reliable high power AlGaAs GaAs 808 nm diode laser...
Proceedings of SPIE (February 19 2007)
Optically Pumped Mid-Infrared NH3 Lasers
Proceedings of SPIE (November 18 1989)
Over 100 mW blue violet laser diodes for Blu ray...
Proceedings of SPIE (May 11 2004)

Back to Top