5 September 2014 Lubricant depletion under various laser heating conditions in Heat Assisted Magnetic Recording (HAMR)
Author Affiliations +
Abstract
Heat assisted magnetic recording (HAMR) is expected to increase the storage areal density to more than 1 Tb/in2 in hard disk drives (HDDs). In this technology, a laser is used to heat the magnetic media to the Curie point (~400-600 °C) during the writing process. The lubricant on the top of a magnetic disk could evaporate and be depleted under the laser heating. The change of the lubricant can lead to instability of the flying slider and failure of the head-disk interface (HDI). In this study, a HAMR test stage is developed to study the lubricant thermal behavior. Various heating conditions are controlled for the study of the lubricant thermal depletion. The effects of laser heating repetitions and power levels on the lubricant depletion are investigated experimentally. The lubricant reflow behavior is discussed as well.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shaomin Xiong, Haoyu Wu, David Bogy, "Lubricant depletion under various laser heating conditions in Heat Assisted Magnetic Recording (HAMR)", Proc. SPIE 9201, Optical Data Storage 2014, 920109 (5 September 2014); doi: 10.1117/12.2062071; https://doi.org/10.1117/12.2062071
PROCEEDINGS
10 PAGES


SHARE
RELATED CONTENT

Deltavision
Proceedings of SPIE (June 11 1985)
The Linear Motor Slide Drive System
Proceedings of SPIE (October 27 1978)
An Overview Of The Media Cartridge Concept For A High...
Proceedings of SPIE (November 10 1983)
Eraseable optical disk systems for signal processing
Proceedings of SPIE (September 01 1991)
Study on the parallel servo control system of a multi...
Proceedings of SPIE (April 09 2003)

Back to Top