Translator Disclaimer
5 September 2014 Decoupling direct tracking control system for super-multilayer optical disk
Author Affiliations +
This paper presents the decoupling direct tracking control method for the super multi-layer optical disk. The disk includes multiple recording layers and a servo layer with a guiding groove, and data is recorded on each recording layer right above the groove of the servo layer by using two laser beams. However, some disturbances such as disk tilt or lens shift might cause displacement between the two focal points. And due to scratches or finger prints on the disk surface, two focal point’s coupling actions destabilize the tracking control. We developed new tracking control method for preventing any displacement and destabilization by the coupling action.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yukinobu Tanaka, Takeshi Ogata, and Seiji Imagawa "Decoupling direct tracking control system for super-multilayer optical disk", Proc. SPIE 9201, Optical Data Storage 2014, 92010R (5 September 2014); doi: 10.1117/12.2064244;


Tracking Servo For Small Size Optical Disk System.
Proceedings of SPIE (January 13 1987)
Lens shift correction for DVD-RAM tracking servo
Proceedings of SPIE (June 27 1999)
A new radial tilt detection method differential wobble phase...
Proceedings of SPIE (September 08 2004)
Fast Access Method Of Optical Disk Memory
Proceedings of SPIE (December 31 1986)

Back to Top