5 September 2014 APS deposition facility upgrades and future plans
Author Affiliations +
Abstract
The Advanced Photon Source (APS) has recently invested resources to upgrade or replace aging deposition systems with modern equipment. Of the three existing deposition systems, one will receive an upgrade, while two are being replaced. A design which adds a three-substrate planetary for the APS rotary deposition system is almost complete. The replacement for the APS large deposition system, dubbed the “Modular Deposition System”, has been conceptually designed and is in the procurement process. Eight cathodes will sputter horizontally on mirrors up to 1.5 meters in length. This new instrument is designed to interface with ion-milling instruments and various metrology equipment for ion-beam figuring. A third linear machine, called the APS Profile Coating System, has two cathodes and is designed to accept substrates up to 200mm in length. While this machine is primarily intended for fabrication of figured KB mirrors using the profile-coating technique, it has also been used to produce multilayer monochromators for beamline use.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ray Conley, Ray Conley, Bing Shi, Bing Shi, Mark Erdmann, Mark Erdmann, Scott Izzo, Scott Izzo, Lahsen Assoufid, Lahsen Assoufid, Kurt Goetze, Kurt Goetze, Tim Mooney, Tim Mooney, Kenneth Lauer, Kenneth Lauer, } "APS deposition facility upgrades and future plans", Proc. SPIE 9207, Advances in X-Ray/EUV Optics and Components IX, 92070I (5 September 2014); doi: 10.1117/12.2062427; https://doi.org/10.1117/12.2062427
PROCEEDINGS
6 PAGES


SHARE
Back to Top