5 September 2014 Control of a 45-cm long x-ray deformable mirror with either external or internal metrology
Author Affiliations +
Abstract
Our 45-cm long x-ray deformable mirror has 45 actuators along the tangential axis, along with one strain gauge per actuator and eight temperature sensors. We discuss the detailed calibration of the mirror's figure response to voltage (fourth-order) and the strain gauges' response to figure changes (linear). The mirror's cylinder shape changes with temperature, which can be tracked with the temperature sensors. We present initial results of measuring figure change with the strain gauges, which works very well for large changes (> 10 nm peak-to- valley), but is noisy with a single strain reading for small changes (5 nm peak-to-valley).
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lisa A. Poyneer, Lisa A. Poyneer, Tommaso Pardini, Tommaso Pardini, Thomas McCarville, Thomas McCarville, David Palmer, David Palmer, Audrey Brooks, Audrey Brooks, "Control of a 45-cm long x-ray deformable mirror with either external or internal metrology", Proc. SPIE 9208, Adaptive X-Ray Optics III, 92080F (5 September 2014); doi: 10.1117/12.2062072; https://doi.org/10.1117/12.2062072
PROCEEDINGS
11 PAGES


SHARE
RELATED CONTENT

A cryogenic 'set-and-forget' deformable mirror
Proceedings of SPIE (July 21 2016)
Characterization of a mechanical bender for x ray mirrors at...
Proceedings of SPIE (September 07 2016)
Metrology of IXO mirror segments
Proceedings of SPIE (October 11 2011)

Back to Top