8 October 2014 A hard x-ray split-and-delay unit for the HED experiment at the European XFEL
Author Affiliations +
For the High Energy Density (HED) experiment [1] at the European XFEL [2] an x-ray split- and delay-unit (SDU) is built covering photon energies from 5 keV up to 20 keV [3]. This SDU will enable time-resolved x-ray pump / x-ray probe experiments [4,5] as well as sequential diffractive imaging [6] on a femtosecond to picosecond time scale. Further, direct measurements of the temporal coherence properties will be possible by making use of a linear autocorrelation [7,8]. The set-up is based on geometric wavefront beam splitting, which has successfully been implemented at an autocorrelator at FLASH [9]. The x-ray FEL pulses are split by a sharp edge of a silicon mirror coated with multilayers. Both partial beams will then pass variable delay lines. For different photon energies the angle of incidence onto the multilayer mirrors will be adjusted in order to match the Bragg condition. For a photon energy of hν = 20 keV a grazing angle of θ = 0.57° has to be set, which results in a footprint of the beam (6σ) on the mirror of l = 98 mm. At this photon energy the reflectance of a Mo/B4C multi layer coating with a multilayer period of d = 3.2 nm and N = 200 layers amounts to R = 0.92. In order to enhance the maximum transmission for photon energies of hν = 8 keV and below, a Ni/B4C multilayer coating can be applied beside the Mo/B4C coating for this spectral region. Because of the different incidence angles, the path lengths of the beams will differ as a function of wavelength. Hence, maximum delays between +/- 2.5 ps at hν = 20 keV and up to +/- 23 ps at hν = 5 keV will be possible.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sebastian Roling, Sebastian Roling, Karen Appel, Karen Appel, Stefan Braun, Stefan Braun, Alexey Buzmakov, Alexey Buzmakov, O. Chubar, O. Chubar, Peter Gawlitza, Peter Gawlitza, Liubov Samoylova, Liubov Samoylova, Björn Siemer, Björn Siemer, Evgeny Schneidmiller, Evgeny Schneidmiller, Harald Sinn, Harald Sinn, Frank Siewert, Frank Siewert, Thomas Tschentscher, Thomas Tschentscher, Frank Wahlert, Frank Wahlert, Michael Wöstmann, Michael Wöstmann, Mikhail Yurkov, Mikhail Yurkov, Helmut Zacharias, Helmut Zacharias, "A hard x-ray split-and-delay unit for the HED experiment at the European XFEL", Proc. SPIE 9210, X-Ray Free-Electron Lasers: Beam Diagnostics, Beamline Instrumentation, and Applications II, 92100B (8 October 2014); doi: 10.1117/12.2061879; https://doi.org/10.1117/12.2061879


A split- and delay-unit for the European XFEL
Proceedings of SPIE (May 02 2013)
Developing an EUV multilayer adaptive mirror: the first results
Proceedings of SPIE (September 14 2016)
A soft x ray split and delay unit for FLASH...
Proceedings of SPIE (June 13 2017)
A hard x ray split and delay unit for the...
Proceedings of SPIE (June 19 2017)
Multilayer supermirror coating for hard x-ray telescope
Proceedings of SPIE (July 18 1996)
Design of an x ray split and delay unit...
Proceedings of SPIE (October 14 2012)
Semitransparent Multilayer Mirrors In The Soft X-Ray Range
Proceedings of SPIE (December 15 1988)

Back to Top