15 September 2014 Characterization of the CCD and CMOS cameras for grating-based phase-contrast tomography
Author Affiliations +
In this article we present the quantitative characterization of CCD and CMOS sensors which are used at the experiments for microtomography operated by HZG at PETRA III at DESY in Hamburg, Germany. A standard commercial CCD camera is compared to a camera based on a CMOS sensor. This CMOS camera is modified for grating-based differential phase-contrast tomography. The main goal of the project is to quantify and to optimize the statistical parameters of this camera system. These key performance parameters such as readout noise, conversion gain and full-well capacity are used to define an optimized measurement for grating-based phase-contrast. First results will be shown.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pavel Lytaev, Pavel Lytaev, Alexander Hipp, Alexander Hipp, Lars Lottermoser, Lars Lottermoser, Julia Herzen, Julia Herzen, Imke Greving, Imke Greving, Igor Khokhriakov, Igor Khokhriakov, Stephan Meyer-Loges, Stephan Meyer-Loges, Jörn Plewka, Jörn Plewka, Jörg Burmester, Jörg Burmester, Michele Caselle, Michele Caselle, Matthias Vogelgesang, Matthias Vogelgesang, Suren Chilingaryan, Suren Chilingaryan, Andreas Kopmann, Andreas Kopmann, Matthias Balzer, Matthias Balzer, Andreas Schreyer, Andreas Schreyer, Felix Beckmann, Felix Beckmann, "Characterization of the CCD and CMOS cameras for grating-based phase-contrast tomography", Proc. SPIE 9212, Developments in X-Ray Tomography IX, 921218 (15 September 2014); doi: 10.1117/12.2061389; https://doi.org/10.1117/12.2061389

Back to Top