12 September 2014 Developments of metal artifact reduction methods of cone-beam computed tomography
Author Affiliations +
Abstract
While clinical applications of cone-beam computed tomography (CBCT) have expanded, current CBCT technology has limitations due to the streak artifacts caused by metallic objects. The aim of this work was to develop an efficient and accurate metal data interpolation in sinogram domain to achieve artifact suppression and to improve CT image quality. In this study, we propose three interpolation methods for the metal projection data. Metal objects are segmented in raw data and replacement of the segmented regions by new values is done using three interpolation schemes, (1) replacing the raw data by the simple threshold value (thresholding method), (2) reducing the raw data to half of the value which is over threshold value (modification method), (3) using the inpainting interpolation (inpainting method). Our references are the CBCT images of the phantoms without the metal implants. The performance was evaluated by comparing the differences of root mean square error (RMSE) before and after metal artifact reduction (MAR). All the metal artifacts were reduced effectively. Metal artifacts reduction using method (1) performs the best, which improve the differences of RMSE more than 60%. This study indicates that metal artifacts can be reduced effectively by manipulating metal projection data.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kun-Long Shih, Kun-Long Shih, Shih-Chun David Jin, Shih-Chun David Jin, Jyh-Cheng Chen, Jyh-Cheng Chen, } "Developments of metal artifact reduction methods of cone-beam computed tomography", Proc. SPIE 9214, Medical Applications of Radiation Detectors IV, 921403 (12 September 2014); doi: 10.1117/12.2064334; https://doi.org/10.1117/12.2064334
PROCEEDINGS
10 PAGES


SHARE
Back to Top