14 June 1988 Hybrid Device Process Using A Focused Ion Beam And An Optical Stepper
Author Affiliations +
Abstract
The focused ion beam (FIB) process has been examined for device production with an optical stepper. The FIB system developed performs and alignment procedure with a precise controlled stage. The registration accuracy attained by FIB lithography using Be and Si ions with the same or different ion energies showed good values with alignment marks covered with resists. The hybrid process with fine pattern delineation depending on FIB and with high throughput depending on an optical stepper indicated a promising tool for submicron devices.
© (1988) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yukinori Ochiai, Yukinori Ochiai, Yoshikatsu Kojima, Yoshikatsu Kojima, Shinji Matsui, Shinji Matsui, Akira Mochizuki, Akira Mochizuki, Masamitsu Yamauchi, Masamitsu Yamauchi, } "Hybrid Device Process Using A Focused Ion Beam And An Optical Stepper", Proc. SPIE 0923, Electron-Beam, X-Ray, and Ion Beam Technology: Submicrometer Lithographies VII, (14 June 1988); doi: 10.1117/12.945639; https://doi.org/10.1117/12.945639
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Status Of The Production Use Of Ion Implantation For IC...
Proceedings of SPIE (November 06 1983)
Focused ion beam methods of nanofabrication room at the...
Proceedings of SPIE (December 20 2001)
Ion projection lithography
Proceedings of SPIE (August 31 1998)
Si MOSFET Fabrication Using Focused Ion Beams
Proceedings of SPIE (June 17 1984)
Ion projection lithography for IC manufacturing
Proceedings of SPIE (April 22 1999)
Avoidance Of Planar Channeling Effects In Si (100)
Proceedings of SPIE (April 08 1985)

Back to Top