31 October 2014 Evaluation damage threshold of optical thin-film using an amplified spontaneous emission source
Author Affiliations +
Abstract
An accurate evaluation method with an amplified spontaneous emission (ASE) as the irradiation source has been developed for testing thin-film damage threshold. The partial coherence of the ASE source results in a very smooth beam profile in the near-field and a uniform intensity distribution of the focal spot in the far-field. ASE is generated by an Nd: glass rod amplifier in SG-II high power laser facility, with pulse duration of 9 ns and spectral width (FWHM) of 1 nm. The damage threshold of the TiO2 high reflection film is 14.4J/cm2 using ASE as the irradiation source, about twice of 7.4 J/cm2 that tested by a laser source with the same pulse duration and central wavelength. The damage area induced by ASE is small with small-scale desquamation and a few pits, corresponding to the defect distribution of samples. Large area desquamation is observed in the area damaged by laser, as the main reason that the non-uniformity of the laser light. The ASE damage threshold leads to more accurate evaluations of the samples damage probability by reducing the influence of hot spots in the irradiation beam. Furthermore, the ASE source has a great potential in the detection of the defect distribution of the optical elements.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qiong Zhou, Qiong Zhou, Mingying Sun, Mingying Sun, Zhixiang Zhang, Zhixiang Zhang, Yudong Yao, Yudong Yao, Yujie Peng, Yujie Peng, Dean Liu, Dean Liu, Jianqiang Zhu, Jianqiang Zhu, } "Evaluation damage threshold of optical thin-film using an amplified spontaneous emission source", Proc. SPIE 9237, Laser-Induced Damage in Optical Materials: 2014, 923729 (31 October 2014); doi: 10.1117/12.2068127; https://doi.org/10.1117/12.2068127
PROCEEDINGS
11 PAGES


SHARE
Back to Top