7 October 2014 Multistatic short range imaging with multipath signals
Author Affiliations +
Active imaging systems in the millimeter wave region have proven to offer good results for security applications. Especially a coherent signal detection results in a high dynamic range. Several techniques and systems were published in the last years. The drawback of an active illumination of the measurement object is the effect of shading and poor illuminated areas due to specular reflections from smooth surfaces. The visibility of an object depends on its surface roughness and its relative positioning to the imaging sensor. Especially in personnel screening, the human skin behaves as a smooth mirror for millimeter waves. This paper describes the incorporation of multipath signals in the imaging process to enhance the illumination properties of active imaging systems. The proposed multipath concept is demonstrated with an active multistatic imaging system working from 70 to 80 GHz for security applications.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Frank Gumbmann, Frank Gumbmann, Sherif Sayed Ahmed, Sherif Sayed Ahmed, "Multistatic short range imaging with multipath signals", Proc. SPIE 9252, Millimetre Wave and Terahertz Sensors and Technology VII, 925205 (7 October 2014); doi: 10.1117/12.2067266; https://doi.org/10.1117/12.2067266


MIMO based 3D imaging system at 360 GHz
Proceedings of SPIE (May 11 2016)
Active millimeter-wave imaging using a raster scanner
Proceedings of SPIE (April 29 2009)
340 GHz 3D radar imaging test bed with 10 Hz...
Proceedings of SPIE (May 08 2012)
Serial Scan Thermal Imaging System
Proceedings of SPIE (December 11 1978)

Back to Top