Design issues of a low cost lock-in amplifier readout circuit for an infrared detector

L. Scheepers; J. Schoeman

doi:10.1117/12.2066294

Abstract

In the past, high resolution thermal sensors required expensive cooling techniques making the early thermal imagers expensive to operate and cumbersome to transport, limiting them mainly to military applications. However, the introduction of uncooled microbolometers has overcome many of earlier problems and now shows great potential for commercial optoelectric applications. The structure of uncooled microbolometer sensors, especially their smaller size, makes them attractive in low cost commercial applications requiring high production numbers with relatively low performance requirements. However, the biasing requirements of these microbolometers cause these sensors to generate a substantial amount of noise on the output measurements due to self-heating. Different techniques to reduce this noise component have been attempted, such as pulsed biasing currents and the use of blind bolometers as common mode reference. These techniques proved to either limit the performance of the microbolometer or increase the cost of their implementation. The development of a low cost lock-in amplifier provides a readout technique to potentially overcome these challenges. High performance commercial lock-in amplifiers are very expensive. Using this as a readout circuit for a microbolometer will take away from the low manufacturing cost of the detector array. Thus, the purpose of this work was to develop a low cost readout circuit using the technique of phase sensitive detection and customizing this as a readout circuit for microbolometers. The hardware and software of the readout circuit was designed and tested for improvement of the signal-to-noise ratio (SNR) of the microbolometer signal. An optical modulation system was also developed in order to effectively identify the desired signal from the noise with the use of the readout circuit. A data acquisition and graphical user interface sub system was added in order to display the signal recovered by the readout circuit. The readout circuit was able to enhance the SNR of the microbolometer signal significantly. It was shown that the quality of the phase sensitive detector plays a significant role in the effectiveness of the readout circuit to improve the SNR.

Citation Download Citation

L. Scheepers, J. Schoeman, "Design issues of a low cost lock-in amplifier readout circuit for an infrared detector", Proc. SPIE 9257, Sensors, MEMS and Electro-Optical Systems, 92570O (23 June 2014); doi: 10.1117/12.2066294; https://doi.org/10.1117/12.2066294

ACCESS THE FULL ARTICLE

PERSONAL SIGN IN
Full access may be available with your subscription

Email or Username Forgot your username?

Password Forgot your password?

Show

Remember Email/Username on this computer

Remember Password

No SPIE account? Create an account
or Institutional Sign In via Shibboleth

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $14.40

Non-members: $18.00 ADD TO CART

Show All Keywords

Keywords/Phrases

Search In:

Publication Years