18 November 2014 Airborne midwave and longwave infrared hyperspectral imaging of gases
Author Affiliations +
Abstract
Characterization of gas clouds are challenging situations to address due to the large and uneven distribution of these fast moving entities. Whether gas characterization is carried out for gas leaks surveys or environmental monitoring purposes, explosives and/or toxic chemicals are often involved. In such situations, airborne measurements present distinct advantages over ground based-techniques since large areas can be covered efficiently from a safe distance. In order to illustrate the potential of airborne thermal infrared hyperspectral imaging for gas cloud characterization, measurements were carried out above smokestacks and a ground-based gas release experiment. Quantitative airborne chemical images of carbon monoxide (CO) and ethylene (C2H4) were obtained from measurements carried out using a midwave (MWIR, 3-5 μm) and a longwave (LWIR, 8-12 μm) airborne infrared hyperspectral sensor respectively. Scattering effects were observed in the MWIR experiments on smokestacks as a result of water condensation upon rapid cool down of the hot emission gases. Airborne measurements were carried out using both mapping and targeting acquisition modes. The later provides unique time-dependent information such as the gas cloud direction and velocity.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Marc-André Gagnon, Marc-André Gagnon, Pierre Tremblay, Pierre Tremblay, Simon Savary, Simon Savary, Marc Duval, Marc Duval, Vincent Farley, Vincent Farley, Martin Chamberland, Martin Chamberland, } "Airborne midwave and longwave infrared hyperspectral imaging of gases", Proc. SPIE 9263, Multispectral, Hyperspectral, and Ultraspectral Remote Sensing Technology, Techniques and Applications V, 926312 (18 November 2014); doi: 10.1117/12.2067321; https://doi.org/10.1117/12.2067321
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT


Back to Top