26 November 2014 Inter-calibration of infrared bands of FY-3C MERSI and VIRR using hyperspectral sensor CrIS and IASI
Author Affiliations +
Abstract
An inter-calibration method of infrared channels of FY-3C MERSI and VIRR using NPP/CrIS and Metop/IASI as the hyperspectral reference sensor is introduced. Based on FY-3C SNO collocated samples with CrIS and IASI, on early orbit, we analyze the calibration biases of infrared bands of MERSI and VIRR. The results show that the brightness temperatures (BT) from the MERSI observation and CrIS have a good consistency, and the BT biases present an approximately normal distribution and the mean BT bias is about -0.18K with standard deviation of 0.83K. When the scene BT is lower than 250 K, the result of MERSI is higher than that of CrIS, while the result of MERSI is lower at the more than 250K scene. The BT from VIRR shows significant systematic bias with respect to CrIS and the mean BT bias is about -0.65 K (channel 4) and -0.72 K (channel 5) at 250K scene with standard deviation of 0.15 K and 0.12 K, respectively. Long term monitoring analysis demonstrates the above biases are stable in the early 6 months. The inter-calibration results using different hyperspectral sensors IASI and CrIS indicate the MERSI/VIRR biases with respect to two reference sensors have a good consistency and this further verifies the reliability of the method. It provides significant information to further correct the calibration biases of MERSI and VIRR.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hanlie Xu, Hanlie Xu, Na Xu, Na Xu, Xiuqing Hu, Xiuqing Hu, } "Inter-calibration of infrared bands of FY-3C MERSI and VIRR using hyperspectral sensor CrIS and IASI", Proc. SPIE 9264, Earth Observing Missions and Sensors: Development, Implementation, and Characterization III, 92640B (26 November 2014); doi: 10.1117/12.2069581; https://doi.org/10.1117/12.2069581
PROCEEDINGS
10 PAGES


SHARE
Back to Top